ip sla responder udp-echo

This command configures the device as a responder to Cisco's IP Service Level Agreements (SLAs) UDP jitter test monitor protocol (MOS and QoS). The device replies with control packets and UDP echo measurement packets.

Up to one instance of the service (in one VRF) is supported. Up to 5 UDP measurement streams are supported.

Syntax

ip sla responder udp-echo [vrf <VRF Name>]

Note

This command is applicable only to data-router functionality.

Command Mode

Privileged User

Related Commands

show data ip sla responder

Example

The following is an example of how this command can be used.

(config-data)# ip sla responder udp-echo vrf LAB1